Skip to main content
  • Solutions
      • Compliance Management
      • Audits and Inspections
      • Compliance Obligations
      • Document Management
      • Incident Management
      • Management of Change
      • Risk Register
      • Pipeline Safety
      • Task Tracking
      • Training
      • Environmental
      • Air Quality
      • ISO 14001
      • EPA RMP
      • LDAR
      • SPCC
      • Stormwater
      • TSCA PCB Management
      • Waste Management
      • Water Quality
      • Health and Safety
      • ISO 45001
      • Asbestos
      • Chemical Management
      • Emergency Planning
      • Industrial Hygiene
      • Hazard Analysis
      • Process Safety Management
      • Other
      • ISO 9001
      • Contractor Management
      • Customer Management
      • Data Management
      • Land Management
      • Oil and Gas
      • Preventive Maintenance
      • EHS Dashboard
      • Mobile EHS App
  • Industries
      • Mining
      • Oil and Gas
      • Manufacturing
      • Food and Beverage
      • Higher Education
      • Healthcare
      • Construction
      • Municipalities
      • Utilities/Power
      • Transportation
      • Petrochemicals
      • Chemicals
  • About
      • Accessibility
      • Security
      • AI Features
      • System Status
      • Release Notes
      • Support
      • Why Ecesis
      • About EDS
      • Frequently Asked Questions
      • Join Our Team
      • Pricing
      • EHS Resources/Tools
      • EHS Compliance Calendars
      • EHS Calculators
      • EHS Inspections
      • EHS Program Audits
      • EHS Blog
Ecesis EHS Software
  • Ecesis EHS Software on LinkedIn
  • Ecesis EHS Software on Facebook

Electrical Safety
Compliance Calendar Software

Electrical Safety Compliance Calendar Software (1910 Subpart S)

Electrical Safety Compliance Calendar Software

OSHA's Electrical standards (29 CFR 1910 Subpart S) cover electrical installation safety, safe work practices for employees working on or near energized equipment, PPE requirements, and specific electrical equipment standards. Combined with NFPA 70E requirements for arc flash hazard assessments, energized work permits, and electrical PPE testing, the compliance obligations for electrical safety are both critical and recurring.

Our Electrical Safety Compliance Calendar Software and mobile app ensures every training requirement, PPE test, equipment inspection, hazard assessment, and program review is scheduled, tracked, and documented.

29 CFR 1910 Subpart S — Divided into two major sections: Design Safety Standards for Electrical Systems (1910.302-308) covering installation requirements aligned with the National Electrical Code, and Safety-Related Work Practices (1910.331-335) covering employee protection from electrical hazards during work activities. Also references 1910.137 for electrical protective equipment testing requirements and NFPA 70E for arc flash hazard analysis.

Key Electrical Safety Compliance Deadlines

INITIAL / EVERY 3 YEARS (NFPA 70E)

Qualified Person Training

Train qualified employees on electrical safety-related work practices per 1910.332. Retrain at intervals to maintain competency. NFPA 70E recommends every 3 years.

INITIAL / AS NEEDED

Unqualified Person Training

Train unqualified employees on electrical hazards they may encounter per 1910.332(b). Retrain when supervision indicates noncompliance or conditions change.

EVERY 6 MONTHS

Insulating Glove Testing

Electrically test insulating gloves before first issue and every 6 months per 1910.137(c)(2)(ii). Class 00/0 gloves may be tested every 12 months under certain conditions.

EVERY 12 MONTHS

Insulating Blanket/Sleeve Testing

Electrically test insulating blankets and sleeves before first issue and every 12 months per 1910.137(c)(2)(iii-iv).

EVERY 5 YEARS (NFPA 70E)

Arc Flash Hazard Assessment

Conduct or review arc flash hazard assessment to determine incident energy levels, arc flash boundaries, and required PPE categories. Update when electrical systems are modified.

PER ENERGIZED WORK EVENT

Energized Electrical Work Permits

Issue energized electrical work permits when work on or near energized conductors cannot be de-energized. Document justification, hazards, PPE, and safe work procedures.

BEFORE EACH USE

Electrical PPE Visual Inspection

Visually inspect insulating gloves, blankets, sleeves, and other electrical PPE before each use for holes, tears, punctures, and embedded objects.

PERIODICALLY

GFCI Testing

Test ground-fault circuit interrupters at required intervals to verify proper operation. Document test results and corrective actions.

PERIODICALLY

Electrical Equipment Inspections

Inspect electrical equipment, panels, wiring, and connections for damage, deterioration, and code compliance. Verify labeling and arc flash warnings.

ANNUALLY (BEST PRACTICE)

Electrical Safety Program Review

Review electrical safety program including safe work practices, training effectiveness, PPE inventory, incident trends, and NFPA 70E compliance.

Top 10 OSHA Violation: Electrical standards including 1910.303 (General Requirements) and electrical wiring violations are consistently among OSHA's most-cited standards. Electrocution is one of the "Fatal Four" leading causes of workplace death in construction. Electrical PPE testing failures and inadequate training are common citation areas.

OSHA & NFPA 70E Standards Overview

1910.302-308 - Design Standards

Electrical installation requirements aligned with the National Electrical Code (NFPA 70)

1910.331-335 - Work Practices

Safe work practices for work on or near exposed energized and de-energized parts

1910.137 - Electrical PPE

Design, testing intervals, and care requirements for insulating gloves, blankets, sleeves

NFPA 70E - Electrical Safety

Arc flash hazard analysis, PPE categories, energized work permits, training requirements

Lockout/Tagout (1910.147)

Energy control procedures for electrical equipment servicing and maintenance

1910.399 - Definitions

Qualified person, unqualified person, and electrical safety terminology

Software Features for Electrical Safety Compliance

Training Scheduling

Track qualified and unqualified person training with 3-year retraining reminders aligned with NFPA 70E recommendations.

Electrical PPE Testing

Schedule 6-month insulating glove tests and 12-month blanket/sleeve tests with automated reminders and out-of-service tracking.

Arc Flash Assessment Tracking

Schedule 5-year arc flash hazard assessments and track updates when electrical systems are modified.

Energized Work Permits

Issue and track energized electrical work permits with justification, hazard documentation, and PPE requirements.

Equipment Inspection Scheduling

Schedule electrical equipment inspections, GFCI testing, and panel audits with deficiency tracking.

PPE Inventory Management

Track insulating gloves, blankets, and sleeves by voltage class, test dates, and service life.

Program Review Reminders

Schedule annual electrical safety program reviews and track corrective actions.

Mobile App

Document electrical inspections, GFCI tests, and PPE checks from the field with our mobile app.

For more information or to schedule a free trial of our Electrical Safety Compliance Calendar Software, please call (720) 547-5102 or email us.

Related Resources

OSHA Compliance Calendar Lockout/Tagout Calendar PPE Compliance Calendar All Compliance Calendars Training Management Inspections & Audits Incident Management EHS Mobile App

What Is Ecesis?

Ecesis is a leading EHS Software Solution that has been helping companies around the world reach their EHS goals since 1993.

About Us

Why Ecesis Join Our Team Pricing Resources EHS Blog

Get in Touch

1499 West 120th Avenue
Suite 110
Westminster, CO 80234
(720) 547-5102 (866) 733-6912 Click To Email Us

Connect With Us

EHS Software on LinkedIn EHS Software on Facebook EHS Blog

Copyright © 2026 EnviroData Solutions, Inc.

Terms of Use    Privacy Statement    Cookies

×

Please complete the form below or call us at (720) 547-5102 to learn more about Ecesis.

Enter Your Name


Enter Your Phone Number


Let Us Know How We Can Help You


Enter Your E-mail


Please check the reCAPTCHA box.